USD
Pioneer® Diamante Series 18,000 BTU 19 SEER Ductless Mini Split, WYT018GLFI19RL
Experience instant relief the moment you enter your room with Pioneer’s latest Diamante series high-wall ductless mini-split heat pumps. This all-new product line was designed and developed to bring a truly affordable heating and cooling solution without sacrificing desirable features. The variable-speed inverter technology and high-efficiency 19 SEER average rating guarantee substantial savings from your monthly energy bill. A dual-swing louver system ensures both horizontal and vertical sweeping air throw, perfectly reach all directions of the room.
All systems in this series come equipped with an auxiliary strip heater in the condensing unit, to provide hyper-heating even in frigid -13°F temperatures. And with noise measurements as low as 34 dB, you can sleep peacefully with air conditioning quieter than even an empty library. In addition, all systems come pre-packed with a full 16 ft. installation kit, so your ductless mini-split heat pump system is ready to be up and running in a single afternoon. Browse our newest selection of wall-mounted Diamante split systems today!
Features
- Cooling capacity: 18,000 BTU/H with 19 SEER efficiency
- Heating capacity: 19,000 BTU/H with 10 HSPF efficiency
- Voltage: 208~230V, 60Hz, 1Ph
- High Wall Mounted Air Conditioning & Heating System
- Variable Speed DC Inverter Operation Mode
- Low Ambient Unit (-13F)
What's Included
- Indoor Unit
- Outdoor Unit
- Wireless Remote Control (with wall holder and batteries)
- R410A Pre-Charged Outdoor Unit
- 16 Ft. Copper Lines
- 16 Ft. Electrical Wire
- 10 Ft. Drain for indoor/outdoor
- Wall Passage Sleeve
- Putty for Wall Hole
- Leak Guard Sealer
- Wrapping Tape
What's Not Included and Required for Installation
- Electrical Requirements, such as Disconnect Box or Electrical Whip
- Vacuum Pump or Vacuum Set (alternatively, you can use the Pioneer Flush Kit)
Important Note
The copper tubing is included in the outdoor unit cardboard box and the communication wiring kit is included in the indoor unit cardboard box.
PRODUCT SPECIFICATIONS:
Condenser Specifications
| Product Dimensions | 30 3/4"W x 11 3/8"D x 23 3/4"H |
| Cooling Capacity | 18,000 BTU |
| Heating Capacity | 19,000 BTU |
| Zone Capacity | 1 |
| Low Ambient Unit | -13F |
| SEER | 19 |
| Voltage | Requires a minimum of 208~230V, 60Hz, 1Ph (please check your home meets this electrical requirement prior to purchase) |
| Warranty | 5 Years |
Air Handler 18K BTU
| Product Dimensions | 39 3/4"W x 8 5/8"D x 12 3/8"H |
| Mount Type | Wall |
| Cooling Capacity | 18,000 BTU |
| Heating Capacity | 19,000 BTU |
| Coverage Area | Up to 650 Square Feet |
| Warranty | 5 Years on Parts |